Dubbel Frame Bag Installation Instructions

Hardware: 

8 x M5 - 8mm Bolts

8 x M5 Washers

Installation: 

Before installing the Dubbel Frame Bag, you will need to remove the 4 bolts on the frame’s downtube and the 4 bolts on the frame's seat tube. 

Once the bolts are removed place the Dubbel Frame Bag in place on the frame. 

Once in place, thread in the 4 bolts on the downtube and the 4 bolts on the seat tube, it's best not to fully tighten any bolt until all bolts have been partially threaded in. You may use the provided hardware or the bolts removed from the bike as well. 

Fully tighten all bolts with the appropriate allen wrench from your Blix Tool Kit.