Dubbel Wheel Guard Installation Instructions

Compatibility: Blix Dubbel

Hardware:

2x Dubbel Wheel Guards

4x 100mm straps

4x 120mm straps

Installation: 

If the straps are not preinstalled on the wheel guards, use 2 shorter straps on the top 2 mounts and the longer straps on the remaining lower mounts.

Loop the top straps around the accessory rail just below the top of the rack. Be sure to align the wheel guard so the Foot Peg mount aligns with the cut-out for it on the wheel guard. 

Loop the remaining straps around the edge rail of the rack to finish the installation. 

Repeat these steps on the other side.