Fix error 30 on a Sol Eclipse

Here is our guide on how to replace the display on your bike. We made a video to help you go step by step, but just in case I am also including a photo guide as well.  https://youtu.be/0PesO7qYqyY
 
Locate the silver locking connector about 6" down from the back of the display wire.



Untwist the silver locking pieces and pull the cables to disconnect
 

 
Uncoil the wire harness holder in a counter clockwise motion to expose the cables inside.
 

 
Remove the mounting points holding the display onto the handlebars.
 

 
Remove the button pad as well
 

 
The procedure for attaching the new display will be the same steps we just did, but in reverse order.
 
When connecting the new display please take extra care to ensure that the arrows on the cables are lined up and pointing at each other. This is a critical step to ensuring that the display functions normally.