Press the switch to the “I” on the battery mounted beneath the saddle to power on the battery. On the dual-battery Packa, you will also need to press and hold the rubber button on the downtube battery. The battery(ies) must be powered on in order to control the display on the bike.
Press and hold the Mode button on the display for 2-3 seconds to turn the display on or off. Assist level 1 (PAS 1) will automatically be activated when the display is turned on. The display will power off automatically after 10 minutes when not in use.
Pressing and holding the Mode button again for 2-3 seconds will power off the display.
